Summer Starts Here - Save up to 70%
Yakima Roof Rack Review - 2014 Nissan Versa- Video
Today on our 2014 Nissan Versa, we're going to be doing a test fit on the Yakima JetStream crossbar roof rack system. It uses the baseline towers. This is going to allow you to carry roof mount accessories on your Versa. Things like bike racks, kayak carriers, cargo boxes, and more.You'll notice how these bars are aerodynamic. These are going to be a lot quieter than your traditional round or square bars.Now, they're going to work with your standard clamp-on accessories. They'll also work with t-slot accessories. more
2/25/2019 1:12:40 PM
Rhino Rack Roof Rack Review - 2012 Nissan Versa- Video
Speaker 1: Today on our 2012 Nissan Versa, we're going to be test fitting the Rhino-Rack Vortex Aero Roof Rack System. This is going to consist of part numbers RRVA118B-2. This is going to be the Vortex Aero Crossbars that you see here. These are 46" long. These also come in silver, part number RRVA118S-2. Holding those in place we have the 2500 Series Legs. more
8/16/2018 4:57:11 PM
Inno Roof Rack Review - 2016 Nissan Versa- Video
Today on our 2016 Nissan Versa, we'll be doing a test fit on the Inno Aero Roof Rack System and using part numbers INXB93-100 for our crossbars, part number INXS200 for the flush feet, and part number INK608 for the custom fit kit. As you saw, we've already got the front one installed. Let's go ahead and do the rear one together. Let's start by grabbing our flush foot here. Then we're going to grab our pad. We need to make sure that this goes on the proper way. more
7/26/2016 10:26:37 AM
Rhino Rack Roof Rack Review - 2016 Nissan Versa- Video
Today on our 2016 Nissan Versa we'll be doing a test fit on the Rhino Rack Vortex Aero roof rack system using part numbers RRVA118B-2 for the aero crossbars and part number RRRLKVA for the leg kit and part number DK232 for the custom fit kit for our Versa. To begin our test fit you'll notice that we've already got the front one installed. We're going to do the rear one together. Let's go ahead and start by grabbing our leg, okay Then we'll grab our pad. Now on the bottom here you'll notice that it's got this raised portion here. We want to make sure that this facing inward as you see it here. more
7/26/2016 10:26:06 AM
Yakima Q Tower Roof Rack Installation - 2012 Nissan Versa- Video
Today on our 2012 Nissan Versa, well be test fitting the Yakima Roof Rack System. Well be using their 48-inch crossbars, part number Y00408, the Yakima Q Towers, part number Y00124, and fit kits, part number Y00731 and Y00634. We already have the crossbar assemblies put together according to the instructions so now were ready to mount it up on top of our vehicle. Well take the front crossbar assembly and set it up on top of our roof. To position in properly, well need to measure 15 inches from the edge of our windshield to the leading edge of the Q Tower on both the passenger and drivers side in the vehicle. Once we have our front crossbar assembly positioned on our roof, we can go ahead and start tightening it down. more
6/21/2012 12:17:23 PM
Filter Videos
Filter Videos
